Page 2
PARTS PART DESCRIPTION PART NO. FRONT LEFT LEG PRT-00138 FRONT RIGHT LEG PRT-00139 REAR LEG PRT-00140 UNDER ARM SUPPORT PRT-00124 SEAT ASSEMBLY SA-00059 LEFT ARM ASSEMBLY SA-00057 RIGHT ARM ASSEMBLY SA-00058 ADIRONDACK SPREADER SS-22.187 BACK ASSEMBLY SA-00048 HARDWARE PART DESCRIPTION PART NO.
Page 3
Please read entire instructions before beginning Attach Part C to Part F by inserting Hardware d into the pre-drilled holes and rotating Part C clockwise, stopping when the assembly is tight Repeat Step 1 with Part A Place Part D into the pre-cut slot and attach it using Hardware b Repeat Steps 1-2 for Parts B, C, G &...
Page 4
Lay the seat/back assembly from Step 5/6 on its side. Fix the assembly from Step 1 to the seat/back assembly. Start by hand-tightening the two bolts (hardware c) in the back leg. Next, hand-tighten the two bolts in the front leg. Then, hand- tighten the two bolts through the middle back support up into the arm.