Page 2
PARTS PART DESCRIPTION PART NO. SIDE LEG ASSEMBLY SA-00364 SQUARE TABLE TOP SA-00366 SQUARE TABLE TOP RAIL ASSEMBLY SA-00402 SQUARE TABLE SPREADER PRT-00789 FOR USE IF CONNECTING FURNITURE-SEE LAST PAGE OF INSTRUCTIONS SA-00395 HARDWARE KIT PARTS DESCRIPTION PART NO. #8 X 1-3/4" TORX SCREW H-0000-S8175 #8 X 2-1/2"...
Page 3
Attach the two side assemblies ( ) to parts Use hardware , 2 at each end of items ). You will need the 6" torx bit ( ) to install the screws. Turn the table top assembly upside down on a flat surface. Turn the frame assembly from step 1 upside down and slide it over the table top.
Page 4
Optional: If you wish to physically connect multiple pieces of furniture together, use the included plates and 1-1/4" screws & ) as shown at left. Connect plates to the inside faces of the front and back legs allowing approximately 1-1/2" of the plate to protrude from the side of the chair.