Advertisement
POWER TROUBLESHOOTING
Symptom
Possible Causes
Power cable is
There is no power
plugged in, but the
coming from the
power indicator
power supply, or
light is not
the plug is not fully
illuminated.
inserted.
Fuse is blown.
Dehumidifier will
Bucket is
not start. Bucket
improperly placed
full indicator is lit.
or removed entirely.
Unit can run
Humidity is set too
normally but
high.
dehumidifying will
not start.
FUNCTIONAL TROUBLESHOOTING
Symptom
Possible Causes
Dehumidifier
An obstruction is
is not
blocking the air vents.
performing
Air filter needs to
well.
be cleaned.
Room is not
properly sealed.
Room temperature
is too low.
Probable Solution
• Check if you have lost power in
other parts of your home. If so, call
your electricity provider and wait
for power to be restored.
• Check whether the outlet or the
circuit has been damaged. If so, try
another outlet.
• Check whether the power cord is
loose or not fully inserted. Unplug
it and plug it back in.
• Check to make sure the power
cord has not been damaged. If it
has, disconnect the unit and call
customer service or an electrician
right away.
Replace the fuse.
Empty the bucket and replace it
correctly.
Press the minus button to lower the
humidity level if you'd like the air
to be drier, or press the CO button
so that the CONTINUOUS indicator
LED is lit, and the dehumidifier will
run continuously.
Probable Solution
Make sure no curtains, clutter, or furniture
are blocking the airflow of the unit.
Clean the air filter.
Close all doors, windows, and/or other
openings to outside the room.
The best environment for dehumidifying is
a warmer room. If the room is too cold, the
dehumidifier will not work as well. Make sure
the room temperature is above 41 °F (5 °C).
TROUBLESHOOTING
14
Hide quick links:
Advertisement
