Thank you for purchasing the Ivation® 70-Pint Energy Star Dehumidifier with Pump. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
Page 3
Parts FRONT VIEW 1. Control panel 2. Air intake vent 3. Cover plate (continuous drainage) 4. Water reservoir 5. Castors 6. Air outlet vent 7. Rear case 8. Power plug BACK VIEW...
Panel Features 1. POWER button: press this button to turn the unit on or off. 2. +/- button: adjusts the targeted humidity level in increments of 5% (this function can be set as low as 35% and as high as 80%). 3.
Removing Collected Water Collected water can be removed in the following ways: 1. When the water reservoir is full, remove and empty it before placing it back in the unit. 2. Continuous draining: water can be automatically emptied into a floor drain by attaching the unit to a water hose with a female threaded end.
Error Codes The following codes may appear on the LED display. Malfunction Code Effect on Possible causes dehumidifier Ambient Compressor, fan Temperature sensor is loose temperature motor and panel or damaged sensor buttons are Display board is damaged or short-circuited malfunction deactivated.
Care and Maintenance • Before cleaning, turn off the power on the unit and disconnect it from the outlet. • Do not use gasoline or other volatile liquids to clean the dehumidifier. • Clean the outer case with a soft towel (for dust) or mild detergent (for significant dirt or grease). •...
Need help?
Do you have a question about the IVALDHG70PWP and is the answer not in the manual?
Questions and answers