Safe lock with rotary knob, dual lock, electronic safe lock for wa safes and reinforced doors (19 pages)
Summary of Contents for WALDIS CAWI 7215
Page 1
OPERATING INSTRUCTIONS SAFE LOCK CAWI 7215 Electronic door lock for WA safes Issue 08.2020...
Page 2
Thank you very much ❤ We would like to thank you for choosing Waldis when it comes to safety. When buying a safe, you have chosen a product tested according to EN1143-1. A Swiss quality product with VdS - tested security.
Safe lock 1.1. General notes 1.1.1. Closed position = Move to the "OPEN" position. (Turn in the direction of the arrow to open the safe). 1.1.2. Opening the lock First turn the opening rotary handle to the closed position. This relieves the load on the lock bolt.
1.1.3. Closing the lock Close the safe door. Turn the opening handle counterclockwise to the closed position (horizontal). The lock closes automatically and is thus secured.
Code Programming 1.2. Code programming menu ATTENTION: All code reprogramming must be carried out with the door open! Edit from point to point, always within 10 seconds Procedure 1. Open door and press keys immediately 2. previous code, e.g. 1 2 3 4 5 6 and enter (factory code) 3.
Power supply 3.1. General If the battery voltage is insufficient, after entering the opening code, a high-pitched warning tone is emitted 10 times and the red and green LEDs flash alternately 10 times. The battery should be replaced within the next few days. The lock is powered by a 9V ALKALINE block battery.
Password 4.1. General basic rules 4.1.1. Avoid obvious passwords • No trivial values like 000000, 0815, 123456 • Do not use your own birthday, car license plate, phone number or name (your own, wife/husband, children, pets, company, place of residence, etc.) as password.
Need help?
Do you have a question about the CAWI 7215 and is the answer not in the manual?
Questions and answers