Page 1
OPERATING INSTRUCTIONS SAFE LOCK CAWI EVO Electronic door lock for WA safes Issue 08.2020...
Page 2
Thank you very much ❤ We would like to thank you for choosing Waldis when it comes to safety. When buying a safe, you have chosen a product tested according to EN1143-1. A Swiss quality product with VdS - tested security.
Safe lock 1.1. General notes The lock works with a 6-digit numerical code. Each keystroke is confirmed with a signal consisting of a tone and a flashing sign. After entering a valid code, a double signal follows. After an invalid entry, a long beep.
1.1.3. Closing the lock Turn the bolt work handle to the "CLOSE" position as far as it will go. The lock closes automatically. Turn the bolt work handle to the "OPEN" position to check whether it is locked.
Code Programming 1.2. Code programming menu ATTENTION: All code reprogramming must be carried out with the door open! Edit from point to point, always within 10 seconds Procedure 1. Open door and press keys 0 1 immediately 2. 0 0 enter 3.
Power supply 3.1. General If the battery voltage is insufficient, after entering the opening code, a high-pitched warning tone is emitted 10 times and the red and green LEDs flash alternately 10 times. The battery should be replaced within the next few days. The lock is powered by a 9V ALKALINE block battery.
Password 4.1. General basic rules 4.1.1. Avoid obvious passwords • No trivial values like 000000, 0815, 123456 • Do not use your own birthday, car license plate, phone number or name (your own, wife/husband, children, pets, company, place of residence, etc.) as password.
Need help?
Do you have a question about the CAWI EVO and is the answer not in the manual?
Questions and answers