Bosch Rexroth IndraDrive Mi Instruction Manual page 45

DOK-INDRV*-KSM02*UL***-IN01-EN-P
Rexroth IndraDrive Mi Distributed Servo Drive KSM02
Selecting the Hybrid Cables
Identifying the Hybrid Cables
Terminal Connector RHS0014
Fig.5-9: Example of Drive System With Hybrid Cable
Each line of drives must be terminated with the terminal connector RHS0014.
All hybrid cables are suited for use in flexible cable tracks. In the example,
cable RKH0700 is used in a flexible cable track. To quickly replace the flexi‐
ble cable track cable for servicing, the cable in the example used in the flexi‐
ble cable track has been equipped with connectors at the inputs.
Hybrid cables are labeled according to the following example:
RKH0111/030,5
The cable designation is made up of:
Cable number ⇒ e.g. RKH0111
and
Cable length ⇒ e.g. 30.5 m
Each line of drives must be terminated at the last connection point X103.2,
using terminal connector RHS0014 (parts number: R911335793). The termi‐
nal connector is not coded.
Bosch Rexroth AG 43/81
Instructions for Use