Interfaces; Marking; Standards And Directives For Functional Safety - Pepperl+Fuchs HiC283 Series Manual

Functional Safety HiC283*
Product Description
2.2

Interfaces

The device has the following interfaces:
• Safety relevant interfaces:
•
•
• Non-safety relevant interfaces: power supply, fault output
Note
For corresponding connections see datasheet.
2.3

Marking

Pepperl+Fuchs Group
Lilienthalstraße 200, 68307 Mannheim, Germany
Internet: www.pepperl-fuchs.com
HiC2831, HiC2832, HiC2831R1, HiC2832R1
HiC2831R2, HiC2832R2, HiC2831R3, HiC2832R3
HiC2831R4, HiC2832R4, HiC2831R5, HiC2832R5
Note
If you design the safety loops in homogeneous redundancy (HFT = 1), you can use the devices
in applications up to SIL 3.
2.4

Standards and Directives for Functional Safety

Device-specific standards and directives
Functional safety
System-specific standards and directives
Functional safety
1-channel devices: input I, output I, output II (optional)
2-channel devices: input I, input II, output I, output II
IEC/EN 61508, part 2, edition 2010:
Functional safety of electrical/electronic/programmable electronic
safety-related systems (manufacturer)
IEC 61511-1:2016+COR1:2016+A1:2017
EN 61511-1:2017+A1:2017
Functional safety – Safety instrumented systems for the process
industry sector (user)
Up to SIL 2
9