Residual Hazards - Lenze 8200 vector Mounting Instructions

1 Safety instructions

Residual hazards

Application notes
Pictograph and signal word
)
Note!
I
Tip!
,
Residual hazards
{
Danger!
Dangerous voltage
All power connections carry dangerous voltages both if the motor is at
standstill and after up to 3 minutes after mains switch off.
Possible consequences:
Death or severe injuries after touching the power connections.
ƒ
Protective measures:
Wait for at least 3 minutes before working on the power connections.
ƒ
Check whether all power connections are de−energised.
ƒ
{
Danger!
Dangerous voltage
The leakage current to earth (PE) is > 3.5 mA AC or > 10 mA DC.
Possible consequences:
Death or severe injuries when the device is touched in the event of a fault.
ƒ
Protective measures:
Implement the actions required in the EN 61800−5−1. Especially:
ƒ
– Fixed installation
– PE connection must conform to standards (PE conductor diameter
³ 10 mm
28
Meaning
Important note to ensure troublefree operation
Useful tip for simple handling
Reference to another documentation
2
or PE conductor must be connected twice)
l
EDK82ZM113−001 DE/EN/FR 1.1