Changing a programme
After the start of a programme, it is no
longer possible to select a different pro-
gramme.
You will need to cancel the current pro-
gramme before you can select a new
one.
Programme cannot be changed
in the display if the programme se-
lector has been moved. The text dis-
appears when the programme selector
is set to the original programme.
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
Disinfection programmes can only be
cancelled with a PIN code.
Touch the Start/Stop sensor.
Select
Cancel programme
The suds will be pumped away. The
programme is cancelled. The door lock
is released.
Pull open the door.
Remove the laundry.
Changing the programme sequence
If you want to select a different pro-
gramme:
Close the door.
Select the programme you want.
Add detergent to the detergent dis-
Touch the Start/Stop sensor.
appears
The new programme will begin.
Switching on the washing ma-
chine after an interruption to
the power supply
If the washing machine is switched off
with the button during a wash pro-
gramme, the programme will be inter-
rupted.
Switch the washing machine back on
Note the message in the display.
.
Touch the Start/Stop sensor.
The programme will also be interrupted
if power is interrupted by a power cut.
When power is resumed, confirm the
Touch the Start/Stop sensor.
The programme continues.
penser drawer, if necessary.
with the button.
message in the display with OK.
45