Miele PWM 508 Mop Star 80 Operating And Installation Instructions page 21

Setting the display brightness

Brightness
–
 Set the brightness you want with the
– and + sensors and confirm your se-
lection with the OK sensor.
The display will change to the next set-
ting.
Reference to external appli-
ances
A reference to external hardware ap-
pears.
 Confirm with the
Before initial commissioning, connect
the XCI box or adapter or slide a com-
munication module into the slot on the
back of the machine. The washing
machine must be disconnected from
the mains. Then start the commission-
ing process.
70
%
OK
+
OK sensor control.
Before using for the first time
Confirm time request
Should the clock display not
Yes
 Touch the
If you select
the Clock display
If you select
to the Clock display
Setting the time of day

Time
 Use the  and  sensors to enter the
time and confirm your entry with the
OK sensor.
The display will change to the next set-
ting.
be shown?
yes or no sensor.
yes , the system will skip
setting.
no , the display will switch
setting.
 
12 : 05
 
No
OK
21