Installing The Holding Bracket; Securing The Washing Machine With The Holding Bracket - Miele PWM 508 Mop Star 80 Operating And Installation Instructions

Installation

Installing the holding bracket

 Place the holding bracket on the
marking on the plinth.
 In the middle of the two outer slotted
holes, mark a point for each drill hole.
 Drill 2 holes (8 mm) with a depth of
approx. 55 mm.
 Insert the plugs in the holes.
 Install the holding bracket with the
hexagon screws and the washers.
Do not tighten the screws yet – this
will allow the holding bracket to be
moved sideways.
68
Securing the washing machine with
the holding bracket
 Push the washing machine back on
to the installed holding bracket.
 Insert the appliance feet (the part
between the foot and the locknut)
into the openings in the holding
bracket.
 Push the holding bracket to the right
as far as it will go.
 Tighten the hexagon screws using a
spanner.
The washing machine is secured in the
holding bracket.