Table of Contents
Advertisement
Quick Links
LIST OF PRODUCTS
Digital Multimeter
*
Digital AC & AC/DC Clampmeter
*
* AC Clamp Adaptor
* AC/DC Current Adaptor
* Transistorised Electronic Analog & Digital Insulation
Resistance Testers(upto 10 KV)
* Digital Sound Level Meter & Sound Level Calibrator
* Digital contact & Non-contact Type Tachometer
* Digital Non-contact (infrared) Thermometer &
Portable Infrared Calibrator
* Thermo Hygrometer / Anemometer
Digital Absolute pressure meter
* Wood, Paper & Grain Moisture Meter
* Distance Meter & Network Cable Tester
* Digital Hand Held Temperature Indicators
* Digital Lux Meter
* Thermal Imaging Camera
* Power Factor Regulator
* Maximum Demand Controller/Digital Power Meter
* Earth Resistance Tester
* Digital Panel Meters & DC Power Supplies
* Digital Storage / Analog Storage Oscilloscope.
* Coating Thickness Guage
* Process Calibrators & Multifunction Calibrators
* Gas Analysers & Waterproof Pen Testers
* Frequency Counter / Function Generator
* Phasing Sticks & High Voltage Detector
* Transducer & Transmitter
* Digital Milli Ohm Meter
* Solar Power Meter
* EMF/ELF Detector / RF Field Strength Meter
17, Bharat Industrial Estate, T. J. Road, Sewree (W),
Mumbai-400015. INDIA
Sales Direct: 24156638
Tel.:
(022)2412 4540, 2418 1649
E-mail : kusam_meco@vsnl.net, Website : www.kusamelectrical.com,
Fax:
2414 9659
www.kusam-meco.co.in
COATING THICKNESS
GAUGE
MODEL - KM 8042
OPERATION
OPERATION
MANUAL
MANUAL
Advertisement
Table of Contents
Related Manuals for Kusam-meco KM 8042
Summary of Contents for Kusam-meco KM 8042
- Page 1 * Digital Non-contact (infrared) Thermometer & GAUGE Portable Infrared Calibrator * Thermo Hygrometer / Anemometer MODEL - KM 8042 Digital Absolute pressure meter * Wood, Paper & Grain Moisture Meter * Distance Meter & Network Cable Tester * Digital Hand Held Temperature Indicators...
-
Page 2: Table Of Contents
COATING CONTENTS THICKNESS GAUGE 1) Preface......... MODEL - KM 8042 2) Safety information......3) Function & Features..... 4) Specifications....... 5) Names of parts ......6) Operation Instruction....7) Calibrating Meter......8) Notices......... 9) Maintenance........ 10) Test certificate......11) Warranty........ -
Page 3: Preface
1. Preface Thickness unit “ m” or “mil” optional. Coupling state display. Please read the following information carefully Shut down manually or automatically. before using the meter. The coating thickness guage Low battery voltage indication. is designed to measure the coating thickness on a magnetic metalic matrix, can be widely used for 4. -
Page 4: Operation Instruction
5. Name of parts : The meaning of the symbols represented by the following： Instrument Familiarization 1. Display zone 2. Thickness units 3. Coupling sign 1. Sensor Cover 4. Indication to low voltage of the batteries 2. Thickness sensor 5. Number of standard thickness piece 3. -
Page 5: Calibrating Meter
5. To turn off : 4. The method of calibrating is following： Press µm/mil then press ON/OFF buttons When the meter is working, pressing button ON/OFF simultaneity. The main display section of the meter is will get shutdown immediately. 0000, the lower left quarter is sample 0. It indicates 6. -
Page 6: Notices
left quarter changes into sample 2 . It indicates Ⅷ ． Notices the thickness of sample 2 will be calibrated. The probe 1. When calibrating on a metallic matrix and can be taken up. measurement on another kind metallic matrix, the error of measurement might be more than the rating c. -
Page 7: Maintenance
6. When calibrating on a plane, measurement is on a Ⅸ . M aintenance curved surface, the error might be more than the 1. CLEANING INSTRUCTIONS rating value. The meter may be wiped down with a wet sponge or cloth using a mild water based detergent or 7. -
Page 8: Test Certificate
MUMBAI WARRANTY Each “KUSAM-MECO” product is warranted to be free from TEST CERTIFICATE defects in material and workmanship under normal use & service. The warranty period is one year (12 months) and begins from the date of despatch of goods. In case any...
Need help?
Do you have a question about the KM 8042 and is the answer not in the manual?
Questions and answers