CK40D DC
6
Operation
!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
I
NOTE
•
Before starting your new coolbox for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (please
also refer to the chapter "Cleaning and care" on page 10).
•
A few water drops may form inside the cooler if it has been cooling
for a lengthy period. This is normal because the moisture in the air
condenses to water when the temperature in the cooler falls. The
cooler is not defective. Wipe it out with a dry cloth if necessary.
6.1
Energy saving tips
•
Choose a well ventilated installation location which is protected against direct
sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
6.2
Connecting the cooler to 12 V/24 V
➤ Make sure the cable between the cooler and the battery is protected by a fuse
(maximum 5 A).
➤ Plug the 12 V/24 V connection cable (fig. 3, page 2) into the DC power outlet
or a 12 V/24 V socket in the vehicle.
➤ Press the "ON/OFF" button (fig. 2 2, page 2)
✓ The cooler starts cooling the interior.
I
NOTE
In most vehicles the ignition must be turned on before power will be
supplied to the DC power outlet.
EN
Operation
7