Operation - Dometic CDF18 Operating Manual

Operation

Item Description
3 ERROR
4 SET
5 –
6 ADJUST
7 Operation
7.1 Before initial use
!
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and maintenance" on page 18).
7.2 Saving energy
• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
12
Explanation
LED flashes red:
Selects the input mode
Temperature setting
Celsius or Fahrenheit display
Set battery monitor
Display, shows the information
The first three digits of the four-digit display show the
temperature, the fourth digit shows the temperature unit
(°C or °F).
Press once to decrease the value
After having reached the lowest value, the loop starts again
with the highest value.
Device is switched on but not ready
for operation
CDF
EN