Operation - Dometic BordBar TB 15 Operating Manual

Operation

7 Operation
A
NOTICE!
• Ensure that the objects placed in the cooler are suitable for cooling
to the selected temperature.
• Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze and can therefore
destroy glass containers
I
NOTE
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 11).
Fastening the device on the seat
➤ Pull out the fastening rail on the rear of the device until it clicks (fig. 2 A, page 3).
➤ Place the device on a seat (passenger seat or the middle seat in the back).
➤ Push the device back against the backrest so that the fastening rail is inserted
between the seat surface and backrest.
➤ Thread the seat belt into one of the belt holders and fasten the device:
– front belt holder (fig. 2 B or C, page 3)
– bottom belt holder (fig. 2 D, page 3)
I
NOTE
Press the release button on the bottom of the device to insert the
fastening rail.
Switching the device on and off
➤ Plug the 12 V connection cable into the cigarette lighter socket or a 12 V socket
in the vehicle.
➤ Push the slide switch into the required position.
✓ The cooler is switched on and starts cooling or heating the interior.
✓ The respective LED lights up.
➤ When you want to switch off the cooler, disconnect the plug.
10
Autogoods "130"
BordBar TB15
EN