Removing The Spool Cover And Replacing The Spool - Cannon MAGNUM 5 Owner's Manual

REMOVING ThE SPOOL COVER AND REPLACING ThE SPOOL

REMOVING ThE SPOOL COVER AND REPLACING ThE SPOOL
Your new downrigger comes with a removable Spool Cover. By
removing this cover, you are able to easily gain access to remove
the Spool. This feature allows you to easily access tangled line,
get it repaired and get you back into action quickly. This feature
also allows you to have multiple Spools for different types of
line. By purchasing additional Spools, you can wind each with a
different type of line (i.e. Uncoated line, Coated Line, braided,
etc.). This allows you to switch out desired Lines quickly and easily.
1
a. Unplug the downrigger and make sure it is
not connected to a power source. Then secure
the Spool.
WARNING
Loosening or removing the Clutch Knob will release the
Spool and allow it to run free. Make sure you secure
the Spool before removing the Clutch Knob. It is
recommended that you wear protective gloves and eye
protection when working with the Spool.
2
b. Locate the Clutch Knob on the Spool side of
the downrigger.
c. Rotate the Clutch Knob clockwise to remove it
from the downrigger.
NOTICE: Take care when removing the Clutch Knob
over open water so you don't drop it into the water.
|
© 2020 Johnson Outdoors Marine Electronics, Inc.
|
cannondownriggers.com
WARNING
Do not touch the Spool while the downrigger is in use.
CAuTION
Remove all tension from the line before removing or replacing
the Spool.
Downrigger Downrigger
1a
Power Cable Power Cable
WARNING
Make sure the downrigger is not connected to a power source.
Downrigger Downrigger
2b
Assembly Assembly
Spool Spool
Clutch Clutch
Knob Knob
41