Installing The Boom Or Telescopic Boom - Cannon MAGNUM 5 Owner's Manual

Electric downriggers
Table of Contents

Advertisement

INSTALLING ThE BOOM OR TELESCOPIC BOOM

1
Item(s) needed:
a.
For the Magnum 5 downrigger, take the Boom
(Item #46) and identify both ends. The end of
the Boom with the screw hole closest to the edge
will be placed the furthest from the Downrigger
Assembly. Take the Boom Adapter (Item #48) and
insert it into the far end of the Boom. This will be
secured later.
b.
For the Magnum 10 or Magnum 10 TS downrigger,
take the Telescopic Boom (Assembly #D or
Assembly #E) and cut the Cable Tie holding the
three tubes of the boom together with a wire
cutter or cutting tool. Remove the cut Cable
Tie and loosen the Boom Clamps by turning
them counterclockwise at the narrow end of the
Telescopic Boom.
c.
The Outer Tube that makes up the wider end of the
Telescopic Boom has 3 holes used for mounting
it to the Downrigger Assembly. The tubes in the
Telescopic Boom need to be extended so that the
holes used to mount the boom to the downrigger are
unobstructed and are free to pass a bolt through.
d.
With the Clamps on the Telescopic Boom loosened,
the tubes of the boom can slide apart. Slide the
Center Tube about 2 inches out from the original
position and then re-tighten the Boom Clamp
towards the narrower end of the boom turning
clockwise. Slide the Middle Tube about 2 inches
out from its original position and tighten the second
clamp. Check the opposite end of the boom to see
if all three holes on the Outer Tube are clear to
pass mounting hardware. If not, re-adjust the Boom
Clamps and tubes to expose the mounting holes.
Secure the clamps by turning them clockwise so
that the tubes do not slide, then set aside.
|
© 2020
Johnson Outdoors Marine Electronics, Inc.
INSTALLING ThE BOOM OR TELESCOPIC BOOM
#D x 1 or #E x 1
|
cannondownriggers.com
1a
Boom
Boom
Toward Downrigger
Toward Downrigger
Boom Clamps
Boom Clamps
1b
Cable
Cable
Tie
Tie
Telescopic Boom
Telescopic Boom
1c
Mounting Hole
Mounting Hole
Narrow End
Narrow End
Wide End
Wide End
Boom Clamp
Boom Clamp
1d
Center Tube
Center Tube
Telescopic Boom
Telescopic Boom
#46 x 1
#48 x 1
Boom
Boom
Adapter
Adapter
Toward Boom End
Toward Boom End
Telescopic Boom
Telescopic Boom
Narrow End
Narrow End
Wide End
Wide End
Mounting Hole Not a through
Not a through
Mounting Hole
Mounting Hole
Mounting Hole
Boom Clamp
Boom Clamp
Middle
Middle
Outer
Outer
Tube
Tube
Tube
Tube
Narrow End
Narrow End
Wide End
Wide End
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magnum 10Magnum 10 ts1902305

Table of Contents