Spool Cover Removal - Cannon Magnum 5 ST Owner's Manual

AnglingOutpost.com
AnglingOutpost.com
REMOVABLE SPOOL COVER
spool cover. By removing this cover, you are able
to gain easy access to your spooled cable and easy
spool removal. This feature allows you to easily ac-
cess tangled line, get it repaired and get you back into
action quickly.
for different types of line. By purchasing additional
reels, you can wind each with a different type of cable
(i.e. Uncoated cable, Coated Cable, Mono, etc.). This
FIGURE 13 allows you to switch out desired cables quickly and
easily.
NOTE: Remove all tension from the line before re-
moving or replacing the spool.
Follow the below steps to remove the side cover:
1) Loosen and remove the clutch knob. Turn the
clutch knob clockwise until it is free of the motor shaft.
(Figures 13 & 14)
2) Loosen the two 1/4-20 Phillips head screws on op-
posite sides on the cover. (Figure 15)
FIGURE 14
NOTE: Screws are captured in the cover and will not
come out completely.
3) Remove the cover and you now have complete ac-
cess to the spool. (Figures 16 & 17)
4) Reassemble by reversing the above steps.
NOTE: Take care when removing the spool over
open water so that the clutch pad or clutch disk
doesn't get pulled off as well. (Figure 17)
WARNING: Do not touch the cable reel while the
downrigger is in use.
FIGURE 15
FIGURE 16
1-888-356-5022
Your new downrigger comes with a removable
This feature also allows you to have multiple reels
1 1
FIGURE 17
www.cannondownriggers.com
1-888-356-5022