Boom And Ball Hook - Cannon Magnum 5 ST Owner's Manual

AnglingOutpost.com
INSTALLING THE BOOM AND BALL HOOK
1) Remove the ball hook collar, ball hook, and 1/4-20
nut from the included hardware bag assembly.
2) Thread the nut onto the ball hook, then thread the
ball hook into the ball hook collar. Do not tighten yet.
(Figure 1)
3) Slide ball hook collar onto the end of the boom and
leave it loose. (Figure 2)
4) Insert boom with ball hook collar assembly into frame
(Figure 3) and line up holes in boom with holes in frame
(Figure 4).
5) Remove 1/4-20 x 2" bolt and 1/4-20 nylon locknut
from included hardware bag assembly.
8
www.cannondownriggers.com
AnglingOutpost.com
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
1-888-356-5022
3 8
1-888-356-5022