NordicTrack SpaceSaver Plus User Manual page 10

10. Tip: Be careful not to pinch the wires during
this step.
Attach the Handlebar (77) to the Upright (10)
with four M6 x 32mm Patch Screws (113).
11. Tip: Be careful not to pinch the wires during
this step.
While another person holds the Console (11)
near the Upright (10), connect the console wire
to the Upper Wire Harness (65). Next, connect
the console pulse wire to the Pulse Sensor Wire
(111). Then, connect the console ground wire to
the Ground Wire (112). Insert the excess wire
into the Upright.
Attach the Console (11) to the Upright (10) with
four M4 x 16mm Round Head Screws (92).
12. Slide the Lower Handlebar Cover (109) into the
slots in the underside of the Console (11).
Attach the Lower Handlebar Cover to the
Handlebar (77) with two M4 x 16mm Blunt
Screws (33).
10
113
77
Avoid pinching
the wires during
this step
11
11
Console
Pulse Wire
111
Ground Wire
112
12
11
77
Slots
109
33
10
111
65 10
Avoid pinching the
wires during this step
Console Wire
65
10
92
92