Easy-To-Solve Errors; Clamp Plate Errors; Inverter Errors - Idex GX300 Manual

Troubleshooting
5.4.1

Easy-to-solve errors

Problem
The display shows 'E01'
The display shows 'E05'
The display shows 'E08'
The display shows 'E48'
The display shows 'E38'
The display shows 'E39'
The display shows 'E47'
5.4.2

Clamp plate errors

Problem
The display shows 'E40'
The display shows 'E41'
The display shows 'E42'
The display shows 'E43'
5.4.3

Inverter errors

Problem
The display shows 'E50'
The display shows 'E51'
The display shows 'E54'
The display shows 'E55'
The display shows 'E56'
The display shows 'E57'
The display shows 'E58'
The display shows 'E60'
The display shows 'E61'
GX300
Possible cause
The door is open.
The cradle lock failed to release
the cradle.
Emergency stop switch is pushed
during Idle/Running state.
The mixer motor is blocked.
No Encoder is detected
No Clamp Current
Clamp plates sticking
Possible cause
Home sensor not found.
Top of clamp plates is not reached
in time.
Clamp plate is sticking on can.
Cradle lock is stuck.
Clamp plate is stuck in up position.
Cradle lock is stuck.
Possible cause
Inverter is in error mode.
Failed to initialize inverter.
Failed to run the mixer motor
forward.
Failed to run the mixer motor
backward.
Failed to stop the mixer motor.
Failed to brake the mixer motor.
Failed to stop braking the mixer
motor.
Failed to send parameter to
inverter.
Failed to send home command to
inverter.
25
Possible solution
Close the door.
Restart the machine. See § 3.2.13.
Release the emergency stop switch. See
§ 3.2.12.
Push the Stop/Up key.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Possible solution
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Possible solution
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.
Restart the machine. See § 3.2.13.