Move The Machine In The Position; Move The Machine To Final Location; Level The Machine - Idex GX300 Manual

Installation
4.3 Move the machine in position
4.3.1 Move the machine to the final location
1. Push the machine to the final location.
2. Connect the power cable to the net entry.
3. Connect the power cable to the wall socket.
4.3.2

Level the machine

1. Move down the adjustable feet (B) until the wheels (A) are off
the ground.
2. Adjust the height of the feet and make sure that the machine
is leveled.
3. Tighten the nuts (C) to lock the feet.
WARNING
Mind the minimum requirement of the load
capacity of the floor. See § 6.2.
CAUTION
Do not use a fork-lift truck.
Note
Make sure that the final location is well-lit and well-
ventilated.
Note
Make sure that the power cable and main switch
are freely accessible.
GX300
22
C
B A
17mm