Remove The Can; Move The Can Plates Manually; Adjust The Mixing Time During Operation - Idex GX300 Manual

Operator manual
3.2.7

Remove the can

1. Wait until you hear a 'beep' and the display shows 'RDY!'
The door is unlocked.
2. Open the door.
3. Pull up the handle (A) to unlock the can table (B).
4. Pull out the can table until you hear a 'click'. The can table
is locked.
5. Remove the can handle retainer.
6. Remove the can.
3.2.8

Move the can plates manually

Move the can plates manually when the door is closed
1. Examine how much space is needed between the can plates.
2. If 0-4 cm extra space is needed:
a. Push the stop/up key. The can plates move 4 cm.
3. If more than 4 cm is needed:
a. Push the stop/up key twice. The can plates move to the
initial position.
3.2.9

Adjust the mixing time during operation

1. Use the T1, T2, T3 keys to increase (+) or decrease (-)
the mixing time.
Note
During operation:
- The display shows the remaining mixing time.
- You can adjust the mixing time.
GX300
16