Placing The Can - Idex GX300 Manual

Operator manual
3.2.5

Placing the can

Pull out the can table
1. Open the door.
2. Pull up the handle (A) to unlock the can table (B).
3. Pull out the can table until you hear a 'click'. The can table
is locked.
Place the can
1. Put one or more cans (A) in the centre of the can table, or in
a pattern that has its gravitational centre in the middle of the
can table.
WARNING
It is possible that the can is heavy. Use the
correct lifting tool when appropriate. Obey the
local regulations.
CAUTION
For multiple can mixing:
- Make sure that all cans have the same
height.
- Do not stack cans upon each other.
We recommend user to press ''P'' button
-
every time he wants to mix multi-cans.
This ensures default clamping pressure of 300kg
& speed of 170RPM for multiple can mode with a
maximum of three can's simultaneously,
this could deliver safety & improved result over
traditional 230rpm centered mixing.
Note
When the diameter of the can is > 039 cm,
remove the upper shield.
GX300
14