Start The Machine - Idex GX300 Manual

Operator manual
2. If the can plates are too close to each other, move the can
plates manually. See § 3.2.8.
Retain the can handle
1. If you place one can, make sure that the can handle (A)
cannot move. Use
handle with strong glue tape.
2. If you place more than one can at the same time, make sure
that the can handles cannot move. Use a can handle retainer,
for example self-adhesive tape.
Put back the can table
1. Pull up the handle (A) to unlock the can table.
2. Push the can table (B) inwards until you hear a 'click'. The can
table is locked.
3. Close the door.
3.2.6

Start the machine

1. If necessary, adjust the mixing time, see § 3.2.9.
2. The mixing speed during operation, see § 3.2.10.
3. The machine starts automatically.
elastic band(B) or stick the can
CAUTION
Make sure that you hear the click. Otherwise the
can table is not locked, which can cause
damage to the can.
GX300
15