Pace DUAL THERMOPIK DTP-80 Operation & Maintenance Manual page 13

4. Insert the Tip & Vacuum Cup
Tool Pin into the end of the
handpiece Vacuum Pick.
5. Gently push the Vacuum Cup
onto the Vacuum Pick.
6. Remove the Tip & Vacuum Cup
Tool.
REMOVAL
1. Place the open-slotted end
of the Tip & Vacuum Cup
Tool around the Vacuum
Pick and behind the Vacuum
Cup as shown.
2. Press the vacuum hose
against the handpiece
handle to hold the Vacuum
Pick in position.
3. Pull the Vacuum Cup off the
end of the Vacuum Pick.
13