Remove
Install
Align tabs with cutouts
Bulb retaining ring
4. Remove the bulb retaining ring and
bulb. Install a new bulb and the bulb
retaining ring.
Turn the ring counterclockwise to remove
it and clockwise to install it.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.
"TOP" mark
5. Install the rubber cover with the
"TOP" mark upward and fit it secure-
ly on the boss.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
6. To install the beam unit and head-
light door, follow the removal proce-
dure in reverse order.
When aiming adjustment is necessary,
contact your Toyota dealer.
—Front fog lights
1. Remove the bolts and take out the
fog light unit.
177