Toyota Hiace Owner's Manual page 138

When connecting the jack handle exten-
sion/extensions and jack handle end, use
the jack handle to tighten the bolt on the
joint as shown in the illustration.
When you tighten the bolt, make sure that
it fits into the depression on the joint.
NOTICE
Tighten all joints securely. Otherwise,
the extension may come off and it
may damage the paint or vehicle
body.
—Raising your vehicle
Front of
vehicle
6. After making sure that no one is in
the vehicle, as the jack touches the
vehicle and begins to fit, double−
check that it is properly positioned.
Rear side only—
When positioning the jack under the rear
axle housing, make sure the groove on
the top of the jack fits with the rear axle
housing.
7. Raise the vehicle high enough so
that the spare tire can be installed.
Remember you will need more ground
clearance when putting on the spare tire
than when removing the flat tire.
To raise the vehicle, insert the jack handle
end into the jack (it is a loose fit) and
turn it clockwise with the handle.
131