Rain-Flo Irrigation 1670 Operating Manual page 4

PLANTING WHEEL ADJUSTMENTS
(S.S. Axle Shaft) To hold planting wheels and plumbing.
(Collars-2) To hold position of plumbing valves.
(Plumbing Valves) To adjust water flow.
(Water Shut-Off Handle) To shut off water supply.
One to four planting wheels can be used at a time; standard is one or
two wheels. When using only one wheel, slide plumbing to one side of
wheel and keep one plumbing valve closed. Planting wheels are set in
position with one bolt in center of wheel and can be moved sideways on
the axle shaft.
Planting wheels will flex up and down over uneven terrain.
Caution; Make sure planting wheels are not puncturing drip tape underneath plastic.
Tire Axle Adjustment
Tire axles need to be adjusted
for high beds, and if more
planting leg room is desired,
shorten top link and lower tire
axles.
Tire axle
adjustment bolt
3
S.S. Axle
Shaft
Collar
Plumbing
Valve
Water
Shut-Off
Handle