Summary of Contents for Rain-Flo Irrigation CHALLENGER 1800
Page 1
CHALLENGER MODEL 1800 PLASTIC MULCH LIFTER ASSEMBLY INSTRUCTIONS Rain-Flo Irrigation 929 Reading Road East Earl, Pa 17519 717-445-3000...
Page 2
STEP 1 Standard parts shipped with equipment: Lifter Prong Set...
Page 3
IftIng rongs See Operating Manuel for adjustments. CHALLENGER 1800 MFG. BY RAIN-FLO IRRIGATION, INC. CHALLENGER 1800 MFG. BY RAIN-FLO IRRIGATION, INC. Install lifting prongs by sliding end through adjusting rod (B), next placing them between brackets (A), and placing lynch pin in position...
Page 4
STEP 3 & D ovIng ePth heels Iscs IDeWays See Operating Manuel for farther adjustments. Depth wheels and vine-cutting Depth wheels and vine-cutting Depth wheels and vine-cutting Depth wheels and vine-cutting Depth wheels and vine-cutting Depth wheels and vine-cutting disc in and out adjustment Upon receiving your plastic mulch lifter, depth wheels and vine-cutting discs will be installed but will need adjustments.
Page 5
STEP 4 & D ovIng ePth heels anD Iscs See Operating Manuel for farther adjustments. Center coulter Depth wheels Disc up & down up & down up & down adjustment adjustment adjustment As shown in Operating Manuel, coulter, disc and wheels may need up &...
Page 6
STEP 5 ractor The Model 1800 has Cat #2 lift pins on a 3-point hitch. Hook up 3-point top link to top of A-frame (A) and adjust top link to level machine.
Page 7
TIPS ❶ Machine works best if weeds and crop residue are mowed off first. ❷ Adjust 3-point top link to level machine. ❸ Drive about 2 to 4 MPH and adjust lifting rods 8 to 12” off the ground (must be lowered if dragging results). ❹...