Canon GP405 Service Handbook page 169

Code Detail code
E5F1
0001
E5F2
0001
0002
E5F3
0001
0002
E5F4
0001
0002
E5F5
0001
0002
Error
• Folding motor (M2S)
• Folding motor clock sensor
(PI4S)
• Guide motor (M3S)
• Guide home positioning
sensor (PI13S)
• Alignment motor (MSS)
• Alignment plate home
position sensor (PI5S)
• Stitcher motor (rear, M6S)
• Stitching home position
switch (rear, PS2S)
• Stitcher motor (front, M7S)
• Stitching home position
switch (front, PS4S)
CHAPTER 5 SELF DIAGNOSIS
Description
• The number of detecting pulses of
the folding motor clock sensor has
dropped below a specific value.
• The guide home positioning sensor
does not turn on even when the
guide motor has been driven for 0.4
sec or more.
• The guide home position sensor
does not turn off even when the
guide motor has been driven for 1
sec or more.
• The alignment plate home position
sensor does not turn on even when
the alignment motor has been
driven for 0.5 sec or more.
• The alignment plate home position
sensor does not turn off even when
the alignment motor has been
driven for 1 sec or more.
• The stitching home position switch
does not turn off even when the
stitcher motor (rear) has been
rotated clockwise for 0.5 sec or
more.
• The stitching home position switch
does not turn on even when the
stitcher motor (rear) has been
driven in reverse for 0.5 sec or
more during jam recovery.
• The stitching home position switch
does not turn off even when the
stitcher motor (front) has been
driven clockwise for 0.5 sec or
more.
• The stitching home position switch
does not turn on even when the
stitcher motor (front) has been
driven in reverse for 0.5 sec or
more.
5-15