Canon GP405 Service Handbook page 131

<CLEAR>
RAM/Jam History/Error Code Clear
Level 3
ERR Initializes an error.
E000, E001, E002, E003, E004, E032, E717
1) Select the item to highlight, and press the OK key.
2) Turn off and then on the main power supply.
DC-CON Initializes the back-up data of the DC controller PCB.
IP Initializes the RAM on the image processor PCB.
MMI-COPY Initializes the back-up data of the control panel. (preference
mode, mode storage)
MMI-FAX Initializes the back-up data of the FAX control panel.
(telephone directory, program memory) However, data for
one-touch dialing, speed dialing, and caller name is not
initialized.
MMI-COM Initializes back-up data for common settings. (auto cassette
change, manual feed size input)
SERVICE Initializes back-up data for service mode.
FAX ID mode
Initializes data for ID and ID password by group.
JAM-HIST Initializes the jam history.
EER-HIST Initializes the error code history.
<MISC-R>
Reader Check
Level 3
SCANLAMP Starts a check on the operation of the scanning lamp.
1) Select the item to highlight, and press the OK key.
Description
Operation
Description
Operation
The scanning lamp will remain on for 1 sec and will
then turn off.
CHAPTER 4 SERVICE MODE
FUNCTION
Remarks
Select the item to
highlight, and
press the OK key.
FUNCTION
Remarks
4-63