Canon GP405 Service Handbook page 142

CHAPTER 4 SERVICE MODE
Level 3
Selects and generates a test print (1 through 8).
TYPE
When the PG screen is closed by resetting, '0' will
automatically be set to return to normal copying mode.
• Selecting the Source of Paper
0 represents normal copying mode (image from the CCD).
TXPH Selects the output mode for the test print selected by
TYPE.
Switches between text mode and photo mode. This mode is
effective only when making test prints, and the setting will
be disabled when the PG screen is closed.
0: text mode
1: photo mode
4-74
Description
When a paper type is selected on the Initial screen,
paper will be picked up from the selected holder.
If auto selection (no source is selected) is enabled, the
topmost holder will be used.
Remarks
Operation
1) Select 'PG', and
enter the number
of the item on the
keypad.
2) Press the OK key
and then the Copy
Start key to
generate a test
print.