Summary of Contents for Sunny Health & Fitness SF-BH620038
Page 1
ADJUSTABLE INCLINE / DECLINE WEIGHT BENCH SF-BH620038 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly.
PARTS LIST Description Spec. Qty. Description Spec. Qty. Main Frame Round End Cap ∮25*1.5 Front Support Square End Cap 30*30*1.5 Tube Rear Support Alloy Wrap ∮25*∮12.5*10 Tube Stabilizer Tube Sponge ∮100*200 Backrest Hex Bolt M12*150 Support Tube Seat Support Flat Washer ∮24*∮12.5*2.0 Tube Foam Rod...
Page 5
ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877- 907-8669). STEP 1: Lift up the Backrest (No. 8) to upright location. Attach the Stabilizer Tube (No. 4) with Adjustable End Caps (No.
Page 6
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877- 907-8669). STEP 3: Attach the Seat (No. 9) to the Seat Support Tube (No. 6) using 4 Hex Socket Head Bolts (No.
Page 7
ADJUSTMENTS & USAGE GUIDE ADJUSTING THE BALANCE In order to achieve a smooth and comfortable usage, you must ensure that the bench is stabled and secured. If you notice that the bench is unbalanced during use, you should adjust the Adjustable End Caps (No.
MAINTENANCE INSTRUCTIONS DAILY MAINTENANCE Inspect and tighten all parts regularly. (Nuts, Bolts, Rubber Pads, Steel Brackets, etc.) Replace any worn or torn parts immediately. Check and ensure the equipment is levelled at all time. Check and tighten all adjustment pins/knobs regularly. WEEKLY MAINTENANCE Use damp cloth on plastic parts only, use dry cloth on metal frames.