Switching On And Off; Operating The Appliance - Miele K 14827 SD Operating And Installation Instructions

Before using for the first time
The stainless steel external and internal
surfaces of the appliance have a layer
of protective foil to prevent scratching
during transportation.
^ Do not remove this foil until the
appliance has been installed or built
in.
^ After removing the protective foil,
treat stainless steel surfaces with a
suitable stainless steel conditioning
agent (available from
www.miele-shop.com) (depending on
country).
Important: A stainless steel
conditioner gives long lasting
protection, and helps to prevent
resoiling.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Active charcoal filters
(Active AirClean filters)
^ Place the active charcoal filters
supplied in the holder, and place the
holder on one of the shelves inside
the refrigerator (see "Active charcoal
filters").
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.

Switching on and off

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Switching on
^ Touch the On/Off sensor until the
temperature display comes on.
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Switching off
^ Touch the On/Off sensor until all of
the indicators go out.
The interior light will not come on when
you open the door and the cooling
process will be switched off. (If this
does not happen, the safety lock is still
activated).
13