Cleaning And Care; Cleaning The Outer Casing, The Interior And Accessories - Miele K 14827 SD Operating And Installation Instructions

A range of Miele branded cleaning
and conditioning agents is available
from the Miele Spare Parts
Department, or via the internet at
www.miele-shop.com (depending on
country).
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
For stainless steel surfaces, use a
suitable stainless steel conditioning
agent.
Make sure that no water can
penetrate into the electronic unit or
into the light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed.
It contains information which is
required in the event of a service call.

Cleaning and care

Before cleaning
^ Switch the appliance off, switch off at
the socket and remove the plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Take out any removable parts, e.g.
shelves, for cleaning.
^ The trays and containers in the door
can be removed from their stainless
steel frames for cleaning.
Cleaning the outer casing, the
interior and accessories
Use lukewarm water with a little
washing-up liquid. Accessories and
shelves should all be handwashed only.
The butter dish is, however, dishwasher
safe.
^ Clean the appliance at least once a
month.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the outer casing,
the interior and accessories with a
damp cloth and dry with a soft cloth.
Leave the door open to air the
appliance for a short while.
^ Stainless steel surfaces can be
cleaned with a proprietary stainless
steel cleaning agent, following the
manufacturer's instructions on the
packaging.
29