Table of Contents
Advertisement
EN
• If the power tool should
start to vibrate abnormally,
stop the engine and check
immediately for the cause.
Vibration is generally a
warning of trouble.
• Stop the engine whenever
you leave the operating
position, before unclogging
the collector/impeller
housing or discharge guide,
and when making any
repairs, adjustments, or
inspections.
• When cleaning, repairing, or
inspecting, make certain the
collector/impeller and all
moving parts have stopped.
• Do not clear snow across
the face of slopes. Exercise
extreme caution when
changing direction on
slopes. Do not attempt to
clear steep slopes.
• Never operate the power
tool without proper guards,
plates or other safety
protective devices in place.
• Never operate the power
tool near glass enclosures,
automobiles, window wells,
drop-offs, etc., without
English
proper adjustment of the
snow discharge angle.
Keep children and pets
away.
• Do not overload the power
tool capacity by attempting
to clear snow at too fast a
rate.
• Never operate the power
tool at high transport
speeds on slippery
surfaces. Use care when
reversing.
• Never direct discharge at
bystanders or allow anyone
in front of the power tool.
• Disengage power to the
collector/impeller when the
power tool is transported or
not in use.
• Use only attachments and
accessories approved by
the manufacturer of the
power tool.
• Never operate the power
tool without good visibility or
light. Always be sure of your
footing, and keep a firm
hold on the handles.
• Walk, never run.
4
Advertisement
Table of Contents
