Paper Is Not Ejected Correctly - Canon DR-2050C Startup Manual

Paper is not ejected correctly

When you are performing page-by-page scanning while a multi-page
document is set in the scanner, scanning pauses with the trailing edge of the
scanned sheet being engaged by the eject roller.
Cause Under these conditions, the scanner enters a standby
state and pauses for the next sheet. It does not indicate a
paper jam.
Remedy To scan the next sheet of the document, manually remove the
page that is engaged by the eject roller, or just start the next scan
job.
For details on how to clear jammed paper, see "Clearing a Paper Jam," on
p. 50.
70
Troubleshooting