Bodywork
•
Remove the screw (14) that fastens the
throttle control/heated handle to the
handlebar.
CAUTION
WHILE REFITTING, PAY ATTENTION TO CORRECTLY PO-
SITION THE THROTTLE CONTROL, WHICH MUST ALLOW
THE STARTER BUTTON TO BE FULLY PRESSED, AS IN-
DICATED.
•
Unscrew and remove the counter-
weight (15) and remove the throttle
control/ heated handle (16) from the
handlebar.
Driving mirrors
REMOVAL
The following procedure is described for a single
rear view mirror, but is valid for both mirrors.
•
Remove the rubber piece (1)
•
Holding the locknut (2) so it cannot ro-
tate, loosen the nut (3)
BODYW - 394
V85 TT