MOTO GUZZI V85 TT Service Station Manual page 308

Chassis
•
Use a small self-tapping screw (M5-
M6) and screw it slightly to grip on the
oil seal.
CAUTION
DO NOT TIGHTEN THE SCREW AS IT COULD DAMAGE
THE UNDERLYING THIN SHEET.
•
Using a clamp to remove the oil seal
from the seat, using a Teflon or wood-
en support to avoid damaging the
flange of the gearbox.
•
Check the correct integrity of the un-
derlying thin sheet
CAUTION
IF THE THIN SHEET IS DAMAGED, THE FLANGE TOGETH-
ER WITH THE BEARING MUST BE REPLACED, AS INDI-
CATED
CHAS - 308
V85 TT