Operation without the remote control
If you have misplaced your remote control, or if the batteries are fl at, you can still operate your receiver
(to a limited extent) from the front panel.
There are four buttons on the front of the receiver:
1)
On/Off switch
:
This switch allows you to switch the receiver on and off again.
Channel down -:
The channel down button switches to the next channel down in the currently selected channel list.
Channel up +:
This button allows you to start the receiver and also to switch to the next channel up in the currently
selected channel list.
Because there are no numbered buttons, no password/PIN-protected functions
can be displayed.
92
1)
The unit is not fully disconnected from the mains (see the sections "Safety Instructions - Important
Notes" and "Periods of extended absence, thunderstorms, mains socket accessibility")