Advertisement
Step 9: Attach the flower box to the coop using screws(D)*2pcs as shown. And then
place the liner into the flower box.
***Note: Liner is designed with small openings at one end. This end should be placed
at the lower end of the flower box to allow water to drain out. The liner can be stapled
in place before filling with dirt to help keep form.
Step 10: Attach the Ladder (20) using screws(F)*4pcs as shown. Next, install the
Roosting bars (18) by locating the roosting bar cleats on the inside coop wall
just above the nesting box and on the opposite wall. Install both roosting bars by
pressing down in cleat.
Next, install the three Divider panels (19) in the nesting box. Slots are provided to
locate and secure each divider panel. See picture below for reference.
I
D
D
18
19
19
19
Advertisement
