Advertisement
Quick Links
1701 38TH AVE W
PO BOX 257
SPENCER, IA 51301
PHONE: 712-262-4191
FAX: 712-262-0248
SERVICE: 800-841-2222
E-MAIL: ccac@cyclecountry.com
www.cyclecountry.com
WINCH
MOUNT KIT
For Honda Big Red
OWNER'S MANUAL
MODEL NUMBER: 25-1180
CUSTOMER MUST RECEIVE A COPY OF THIS
OWNER'S MANUAL AT TIME OF SALE
© 2008 Cycle Country Accessories Corp.
11/3/08
MAN0071
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Cycle Country 25-1180
Summary of Contents for Cycle Country 25-1180
- Page 1 FAX: 712-262-0248 SERVICE: 800-841-2222 E-MAIL: ccac@cyclecountry.com www.cyclecountry.com WINCH MOUNT KIT For Honda Big Red OWNER’S MANUAL MODEL NUMBER: 25-1180 CUSTOMER MUST RECEIVE A COPY OF THIS OWNER’S MANUAL AT TIME OF SALE © 2008 Cycle Country Accessories Corp. 11/3/08 MAN0071...
- Page 2 Cable Clamp, Cable Stop & Roller Hawse are included in all Cycle Country Winch Kits Model Number 25-1180 Parts List ITEM NO. QTY. PART NO. DESCRIPTION 1 CYC0935 Winch Mount Weldment 1 CYC0939 Roller Hawse Mount Plate 1 CYC0940 Roller Hawse Back Plate...
- Page 3 THIS WINCH MOUNTING KIT CAN BE USED TO MOUNT A CYCLE COUNTRY 1500/2500 WINCH OR A WARN 15RT- XT/25RT-XT/30RT-XT/4.0ci WINCH. All directions referring to right and left are when the rider is sitting in the drivers’ seat of the machine. Please Note: The cable clamp, roller hawse, and cable stop are included in Cycle Country winch kits.
- Page 4 c) Mount the winch to the winch mount plate using hardware supplied with this kit or the winch, using the illustration below as a mounting guide. 5) Lift the winch and winch mount plate assembly up until the top of the winch is approximately 1/4”...
- Page 5 6) Relay installation instructions. a) Mount the relay and the relay mount plate (Item 4) to the frame link connection located on the side of the battery box. b) Wire your winch according to the manufacturers’ instructions. 7) Included in this kit is a switch mount bracket and back plate (Items 6 & 7) that will work for many different switch types.
- Page 6 b) Step 2: Install U-clamps, carriage bolts, spacers and lock nuts. c) Finished view.
- Page 7 Feed the winch cable through the roller hawse rollers and reinstall the front bumper to vehicle. (Depending on how large your cable end is, you may need to remove one of the long rollers and the two short rollers from the roller hawse and feed the winch cable through.
-
Page 8: One-Year Limited Warranty
ONE YEAR LIMITED WARRANTY For the period of one year from the purchase date Cycle Country Accessories Corporation will replace for the original purchaser, free of charge, any part or parts, when found, upon examination by Cycle Country Accessories Corporation, to be defective in material, workmanship, or both.
Need help?
Do you have a question about the 25-1180 and is the answer not in the manual?
Questions and answers