Page 2
Note: Not all parts are used in every application. Refer to your winch instructions for specific requirements. Model Number 25-7030 Parts List ITEM NO. QTY. PART NO. DESCRIPTION 1 CYC4441 Bottom Winch Mount Plate...
Page 3
MODEL NUMBER25-7030 WINCH MOUNT INSTALLATION INSTRUCTIONS Note: If installing this kit with the Cycle Country 2500 or Warn 2000/2500 Winches, you Will Not use the winch mount and four provided 5/16” bolts and nylock nuts. 1. Remove front bumper guard to ease installation.
Page 4
Be sure that when the winch is mounted to the ATV, the winch motor is to the RIGHT side of the machine. (The two 5/16” x 3/4” flat head bolts, four 5/16” bolts and nylock nuts and the CYC4444 winch mount are not used in the Cycle Country 2500 winch application).
Page 5
FAILURE TO RELEASE THE SWITCH MAY CAUSE DAMAGE TO WINCH PARTS OR TO THE ATV. When using the Winch to raise and lower a Cycle Country Plow, a Cable Stop must be installed. Hook the Winch Cable to the CYC0345 (U608) (item #4 on your 15-0001 push tube kit) through the slotted hole.
Page 6
ONE YEAR LIMITED WARRANTY For the period of one year from the purchase date Cycle Country Accessories Corporation will replace for the original purchaser, free of charge, any part or parts, when found, upon examination by Cycle Country Accessories Corporation, to be defective in material, workmanship, or both.
Page 7
If a winch is what you must have, then you’ve come to the right place: 1500lb and 2500lb Winches We also have an extensive line of winch mounts for both Cycle Country and Warn winches If you need to haul more gear on your quad, check out our baskets:...
Need help?
Do you have a question about the 25-7030 and is the answer not in the manual?
Questions and answers