Before Using; Inserting / Replacing The Batteries - Parkside PLEM 20 A4 Operation And Safety Notes

Use a dry lint-free cloth or cotton swab to clean
the contacts on the battery / rechargeable battery
and in the battery compartment before inserting!
Remove exhausted batteries / rechargeable bat-
teries from the product immediately.

Before using


Check the consignment for completeness and for
signs of visible damage.
Remove all packaging material from the product.

Inserting / replacing the batteries

When the low battery icon
, you can still make measurements. As soon as the
3
battery icon turns empty
the batteries. Measurements are no longer possible.
Open the battery compartment cover
tly pushing down the battery compartment cover
latch.
Remove the used batteries from the battery com-
partment
Insert the (new) batteries. Ensure the correct
polarity as shown on the diagram inside the
battery compartment
Replace the battery compartment cover
shown (fig. A).
, however, you must replace
, if necessary.
6b
6b
appears in the display
.
by gen-
6a
as
6a
GB/IE 33