Before Using; Inserting / Replacing The Batteries - Parkside 20 M PLEM 20 A4 Operation And Safety Notes

Insert batteries / rechargeable batteries according to polar-
ity marks (+) and (-) on the battery / rechargeable battery
and the product.
Use a dry lint-free cloth or cotton swab to clean the contacts
on the battery / rechargeable battery and in the battery
compartment before inserting!
Remove exhausted batteries / rechargeable batteries from
the product immediately.

Before using


Check the consignment for completeness and for signs of
visible damage.
Remove all packaging material from the product.

Inserting / replacing the batteries

When the low battery icon
can still make measurements. As soon as the battery icon turns
empty , however, you must replace the batteries. Measure-
ments are no longer possible.
Open the battery compartment cover
down the battery compartment cover latch.
Remove the used batteries from the battery compartment
if necessary.
Insert the (new) batteries. Ensure the correct polarity as
shown on the diagram inside the battery compartment
Replace the battery compartment cover
(fig. A).
12 GB
appears in the display
by gently pushing
6a
6a
, you
3
,
6b
.
6b
as shown