Measuring Lengths - Parkside PLEM 20 A4 Operation And Safety Notes

in inch
ft foot / feet

Measuring lengths

Briefly press the MEAS button
the laser beam. Once the laser is switched on,
this is indicated on the top left corner of the dis-
play by the icon
3
Note: If laser beam is already activated, the
above mentioned step can be skipped.
Now aim the laser at the target point. Briefly press
the MEAS button
successful the measured value will be shown on
the bottom line of the display
beam will be turned off.
If needed to measure another distance, repeat
above steps.
Newly measured value will be shown on the
bottom line of the display
measured value will be shown in the middle of
the display
turned off.
.
7
again. If the measurement is
4
. Now, the laser beam will be
3
again to activate
4
and the laser
3
and the previous
3
GB/IE 35