Before Using; Inserting / Replacing The Batteries - Parkside PLEM 50 A1 Operation And Safety Notes

Remove batteries / rechargeable batteries if the product will
not be used for a longer period.
Risk of damage of the product
Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity
marks (+) and (-) on the battery / rechargeable battery and
the product.
Clean the contacts on the battery / rechargeable battery and
in the battery compartment before inserting!
Remove exhausted batteries / rechargeable batteries from the
product immediately.

Before using


Check the consignment for completeness and for signs of
visible damage.
Remove all packaging material from the product.

Inserting / replacing the batteries

When the low battery icon
still make measurements. As soon as the battery icon turns empty
, however, you must replace the batteries. Measurements are
no longer possible.
Open the battery compartment cover
down the battery compartment cover latch
appears in the display
by gently pushing
5b
, you can
2
.
32
GB/MT 97