Water contamination in torch head, check for water in water trap at rear of machine, if water is
present, drain air compressor, clean water out of air lines, empty water trap by pressing water
release button on bottom of air regulator water trap. Fit new consumables as per instructions
earlier in this manual
R-Tech Torch Spares
Plasma 31C
Electrode
Cutting Tip
Ceramic Shield Cup
Gas distributor insulator ring
Torch Head - Handheld
Torch Complete - Handheld 6M
Plasma Torch Consumables parts list
18
Part No.
P30-EL
P30-CT
P30-SC
P30-GD
P30-THH
P30-4.5MHHT